Budget Test- Solf Pack Testsealabs Covid-19 Antigen Test Cassette Home Use
INTRODUCTION
The COVID-19 Antigen Test Cassette is a rapid test for the qualitative detection of SARS-CoV-2 nucleocapsid antigen in anterior nasal swabs. It is used to aid in the diagnosis of SARS- CoV-2 infection that may lead to COVID-19 disease. The test can be carried out at any time and is suitable for symptomatic persons. Minors must be assisted in the test by Adults It is recommended to use this test only as a supplement to other
diagnostic procedures. The testis designed for self-administration by lay users and can be performed outside the laboratory.
PRODUCT PICTURES
PRODUCT FEATURE
Fast and easy to self-test at anywhere
Easy to interpret the results using mobile application
Qualitatively detect the SARS-CoV-2 nucleocapsid protein
Use for nasal swab or saliva specimen
Fast results only in 10 minutes
Identify individual’s current infection status to COVID-19
MATERIAL
Materials provided:
|
Specification |
1T |
|
Test Cassette |
1 |
|
Nasal Swab |
1 |
|
Prepackaged extraction buffer |
1 |
|
Package Insert |
1 |
|
Tube stand Workbench |
/ |
DIRECTIONS FOR USE
① Open the packaging. You should have the test cassette 、Prepackaged extraction buffer 、 the nasal swab and packageinsert in front of you.
② Peel the foil sea from the top pf the extraction tube containing the extraction buffer
③Open the swab on the side of the swab tip, carefully remove the swab without touching the tip.
④Now take the same nasal swab and insert it into the other nastril, swab the inside of the nostril in a circular motion 5 times for at least 15 seconds, please perform the test directly with the sample and do not leave it standing.
5.Place the nasal swab into the tube filled with extraction buffer .Rotate the swab for at least 30 seconds while pressing the swab tip against the inside of the tube,to release the antigen in the swab.
6.Press the swab tip against the inside of the tube. Try to release as much liquid as possible from the swab.
7.Put the cap tightly back on the tube to avoid any leaks Place 3 drops of sample from the top into the sample well of the test Cassette. The sample well is the round recess atthe bottom of the the test Cassette and is marked with an "S".
8.Start the stopwatch and wait 15 minutes before reading,even if the control line becomes visible before. Before that,the result may not be correct.
You can refer to Instuction Video:
INTERPRETATION OF RESULTS
Positive: Two lines appear. One line should always appear in the control
line region(C), and another one apparent colored line should appear in
the test line region.
Negative: One colored line appear in the control region(C).No apparent
colored line appear in the test line region.
Invalid: Control line fail to appear. Insufficient specimen volume or
incorrect procedural techniques are the most likely reasons for control
line failure.
